Wang, F., Gao, X., Ma, L., & Yuan, C.(2020).Environmental Sustainability of Metal-Assisted Chemical Etching of Silicon Nanowires for Lithium-Ion Battery Anode.JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE,17(1).
Zhou, L., Garg, D., Qiu, Y., Kim, S., Mudawar, I., & Kharangate, C.(2020).Machine learning algorithms to predict flow condensation heat transfer coefficient in mini/micro-channel utilizing universal data.INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,162
Gbur, J., Kelley, R., & Lewandowski, J. J.(2020).Plasma Focused Ion Beam Serial Sectioning as a Technique to Characterize Nonmetallic Inclusions in Superelastic Nitinol Fine Wires.MICROSCOPY AND MICROANALYSIS,26(6),1088-1099.
Sui, Y., & Zorman, C.(2020).Inkjet Printing of Metal Structures for Electrochemical Sensor Applications: A Review.Journal of the Electrochemical Society,167(3),037571.
Ozguner, O., Shkurti, T., Huang, S., Zhao, B., Jackson, R., Newman, W. S., & Cavusoglu, M. C.(2020).Camera-Robot Calibration for the da Vinci Robotic Surgery System.IEEE Transactions on Automation Science and Engineering.
Man, Y., Kucukal, E., Bakhshiani, M., Watson, Q., Bosch, J., Zimmerman, P., Little, J., & Gurkan, U.(2020).Microfluidic assessment of red blood cell mediated microvascular occlusion.Lab on a Chip,20(12),2086-2099.
Xiao, Q., Sow, A., Maxwell, B. M., & Radulescu, M. M.(2020).Effect of boundary layer losses on 2D detonation cellular structures.Proceedings of the Combustion Institute.
Kandhari, A., Wang, Y., Chiel, H., Quinn, R. D., & Daltorio, K. A.(2020).An Analysis of Peristaltic Locomotion for Maximizing Velocity or Minimizing Cost of Transport of Earthworm-Like Robots.Soft Robotics.
Babushok, V., Katta, V., & Takahashi, F.(2020).Equivalence Ratio Influence on the Flame Suppression Concentration of 2-BTP and Novec 1230.Combustion Science and Technology.
Moses, K., Willis, M., & Quinn, R. D.(2020).Biomimicry of the Hawk Moth, Manduca sexta (L.), Produces an Improved Flapping-Wing Mechanism.Biomimetics,5(2),25.
Adachi, M., Hamaya, S., Yamagata, Y., Loach, A., Fada, J., Wilson, L., Carter, J. W., Fukuyama, H. W., & French, R. H.(2020).In-situ observation of AlN formation from Ni-Al solution using an electromagnetic levitation technique.Journal of the American Ceramic Society.
Qiu, Y., Garg, D., Zhou, L., Kharangate, C., Kim, S., & Mudawar, I.(2020).An artificial neural network model to predict mini/micro-channels saturated flow boiling heat transfer coefficient based on universal consolidated data.INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,149
Fitzpatrick, M., Wang, Y., Thomas, P., Quinn, R. D., & Szczecinski, N. D.(2020).Robotics Application of a Method for Analytically Computing Infinitesimal Phase Response Curves..
Vetturini, A., Cui, W., Liao, Y. T., Olson, S. T., & Ferkul, P. T.(2020).Flame Spread Over Ultra-thin Solids: Effect of Area Density and Concurrent-Opposed Spread Reversal Phenomenon.Fire Technology,56(1),91-111.
Jung, K., Lee, H., Kharangate, C., Zhou, F., Asheghi, M., Dede, E., & Goodson, K.(2020).Experimental Investigation of Single-phase Cooling in Embedded Microchannels: 3D Manifold Heat Exchanger with R-245fa.AMER SOC MECHANICAL ENGINEERS.
Mertova, K., Dzugan, J., Roudnicka, M., Daniel, M., Vojtech, D., Seifi, M., & Lewandowski, J. J.(2020).Build Size and Orientation Influence on Mechanical Properties of Powder Bed Fusion Deposited Titanium Parts.METALS,10(10).
Deng, K., Szczecinski, N., Hunt, A., Chiel, H., & Quinn, R. D.(2020).Kinematic and Kinetic Analysis of a Biomechanical Model of Rat Hind Limb with Biarticular Muscles..
Carter, J. W., Verma, A. W., & Senanayake, N. W.(2020).Harnessing Legacy Data to Educate Data-Enabled Structural Materials Engineers.MRS Advances,5(7),319-327.
